List of Messages |
CAUSE: The specified WYSIWYG primitive has an INIT_FILE parameter that specifies a Memory Initialization File (.mif), but also has a RAM_BLOCK_TYPE parameter that is set to MRAM. However, M-RAMs do not support MIFs. Either the WYSIWYG primitive must not have the INIT_FILE parameter setting, or the RAM_BLOCK_TYPE parameter must be set to a value other than MRAM.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.