List of Messages |
CAUSE: The specified WYSIWYG primitive has the RAM_BLOCK_TYPE parameter set to MRAM, but is in read-only mode (that is, the OPERATION_MODE parameter is set to ROM). However, M-RAMs do not support read-only mode. Either the RAM_BLOCK_TYPE parameter must be set to M4K or M512, or the OPERATION_MODE parameter must be set to a value other than ROM.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.