List of Messages |
CAUSE: The specified WYSIWYG RAM primitive has ECC port connections which is not allowed because the ECC parameter is not set. The port must be disconnected or the parameter must be set.
ACTION: Check your design and make sure the ECC mode is turned on so the ECC ports can be used.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.