List of Messages |
CAUSE: The specified WYSIWYG primitive has the first specified parameter set to a value; however, the second specified parameter is not set to the specified value. The first parameter cannot have a value unless the second parameter is set to the specified value. Either the value for the first parameter must be removed, or the second parameter must be set to the specified value.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.