List of Messages |
CAUSE: The specified WYSIWYG primitive has the specified <port name> _CLEAR parameter, but the parameter is specified for an unregistered port. Only ports that are registered (that is, that have a specified clock) can have a <port name> _CLEAR parameter specified. The <port name> _CLEAR parameter must be removed or must be set to NONE.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.