List of Messages |
CAUSE: The specified WYSIWYG primitive has the specified port with the specified width, but the number of connected bits exceeds the number of bits specified in the width. Either the extra bits of the port must be disconnected, or the width specification for the port must be larger to accommodate the extra bits.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.