List of Messages |
CAUSE: The specified WYSIWYG primitive is in XOR mode (that is, the OPERATION_MODE parameter is set to XOR), and does not use the pexpout port, but is not using any of the pterm n (pterm0 - pterm4) ports. All of the pterm n ports must be used if the pexpout port is not used and the WYSIWYG primitive is in XOR mode.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.