List of Messages |
CAUSE: The specified WYSIWYG primitive is in XOR mode (that is, the OPERATION_MODE parameter is set to XOR), and does not use the pexpout port, but uses the pterm5 port. The pterm5 port must not be used if the pexpout port is not used and the WYSIWYG primitive is in XOR mode.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.