List of Messages |
CAUSE: The specified WYSIWYG MCELL primitive is in either XOR or XNOR mode (that is, the OPERATION_MODE parameter is set to XOR or XNOR) and is also in TFF mode (that is, the REGISTER_MODE parameter is set to TFF) and parallel expander mode (that is, the PEXP_MODE parameter is set to ON). The TFF mode can be used only when the OPERATION_MODE parameter is set to NORMAL, INVERT, or VCC.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.