List of Messages |
CAUSE: The specified WYSIWYG MCELL primitive is set to VCC mode (that is, the OPERATION_MODE parameter is set to VCC) and is set to combinational mode (that is, the OUTPUT_MODE parameter is set to COMB), but has parallel expander mode turned off (that is, the PEXP_MODE parameter is set to OFF). When the WYSIWYG MCELL primitive is in VCC mode and is not in parallel expander mode, it can have no data inputs and can implement only a TFF or a fast input register, and therefore cannot also be in combinational mode. At least one of the parameter values must be changed.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.