List of Messages |
CAUSE: The specified WYSIWYG LCELL COMB primitive is in shared arithmetic mode (that is, the SHARED_ARITH parameter is set to ON), but does not use the sharein port. The sharein port must be used when in shared arithmetic mode. Either the sharein port must be used or the SHARED_ARITH parameter must be set to OFF.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.