List of Messages |
CAUSE: The specified WYSIWYG LCELL COMB primitive is in extended LUT mode (that is, the EXTENDED_LUT parameter is set to ON), but does not use all of the LUT input ports, which are the dataa, datab, datac, datad, datae, dataf, and datag ports. Either the dataa, datab, datac, datad, datae, dataf, and datag ports must all be used or the EXTENDED_LUT parameter must be set to OFF.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.