Allows you to specify the operation of a Serial Vector Format File as either device programming or verification.

Allows you to specify the programming options as either Blank-check or Verify.

Allows you to specify the JTAG TCK clock frequency in units of MHz, KHz, or Hz. The maximum frequency allowed is family dependent.

For more information about JTAG TCK clock frequencies for Altera device families,  see the device-specific chapter of the Configuration Handbook on the Altera website.

This option is available only if you selected Serial Vector Format in the File format list in this dialog box.

Allows you to specify the supply voltage of the target configuration device. If you select Serial Vector Formats (.svf) in the File Format list, you can set the supply voltage to 1.8 V, 3.3 V, or 5.0 V to match the voltage of the target environment. You must specify the same voltage for the configuration device as the voltage of the target environment to ensure successful programming. This option is available only if you selected Serial Vector Format (.svf) in the File format list in this dialog box.