Intel® Quark™ microcontroller D2000 – Design consideration pin multiplexing of a GPIO application

ID 777756
Updated 8/26/2016
Version Latest




Intel® System Studio 2016 for Microcontrollers is an integrated tool suite for developing, optimizing, and debugging systems and firmware for the Intel® Quark™ microcontroller D2000 and Intel® Quark™ SE microcontroller development boards, which offers a microcontroller core to enable applications from device control to edge sensing IoT solutions. This document shows the design consideration while developing application using Intel® System Studio 2016 for Microcontrollers.


Objective of this document

This document describes what kind of configurations are needed to be considered to implement your own customized GPIO application which uses other peripheral interfaces such as I2C, SPI, PWM and ADC channels. Because the Intel® Quark™ microcontroller D2000 has limited physical pinout which is compatible with Arduino UNO 3 header pinout, you need to carefully configure each pinout according to your application interface with a sensor or an actuator.