Intel® Acceleration Stack用户指南: Intel FPGA Programmable Acceleration Card N3000

下载 PDF
ID 683040
日期 8/17/2020
Public
文档目录
文档目录 x
1. 关于本文档 2. 系统要求 3. 硬件安装 4. 安装OPAE软件 5. OPAE工具 6. 样例测试：本地环回(Native Loopback) 7. 安装Intel XL710驱动程序 8. 配置以太网接口 9. 使用Data Plane Development Kit (DPDK)测试网络环回 10. 正常关机 11. 单粒子翻转(Single Event Upset (SEU)) 12. Intel Acceleration Stack用户指南： Intel® FPGA PAC N3000的文档修订历史 A. 故障排除 B. 通过BMC的Production版本和 Intel® Arria® 10映像对 Intel® FPGA PAC N3000进行升级 C. 配置4.19 Kernel D. fpgabist样例输出
1. 关于本文档 x
1.1. 略缩语列表
2. 系统要求 x
2.1. 冷却需求
3. 硬件安装 x
3.1. 安装 Intel® FPGA PAC N3000
4. 安装OPAE软件 x
4.1. 安装其他软件包 4.2. 安装发布软件包(Release Package) 4.3. 识别 Intel® FPGA PAC N3000上的 Intel® MAX® 10版本
4.2. 安装发布软件包(Release Package) x
4.2.1. 删除之前的OPAE软件包 4.2.2. 安装Acceleration Stack for Runtime 4.2.3. 安装Acceleration Stack for Development 4.2.4. 验证OPAE安装 4.2.5. 安装配置文件
4.3. 识别 Intel® FPGA PAC N3000上的 Intel® MAX® 10版本 x
4.3.1. FPGA出厂映像概述
5. OPAE工具 x
5.1. 使用fpgasupdate 5.2. 使用fpgainfo 5.3. 使用fpgabist测试PCIe和外部存储器 5.4. 使用fpgadiag测试网络环回
7. 安装Intel XL710驱动程序 x
7.1. 更新Intel XL710固件
8. 配置以太网接口 x
8.1. 修改接口Maximum Transmission Unit (MTU)大小 8.2. 设置前向纠错(FEC)模式 8.3. Ethernet暂停流控制(Ethernet Pause Flow Control) 8.4. 获取链路状态和统计信息
9. 使用Data Plane Development Kit (DPDK)测试网络环回 x
9.1. 使用外部流量生成器进行测试 9.2. 使用数据包生成器进行测试 9.3. DPDK中的故障排除 9.4. 从DPDK还原为OPAE
10. 正常关机 x
10.1. 背景 10.2. 使用OPAE 10.3. 使用DPDK
11. 单粒子翻转(Single Event Upset (SEU)) x
11.1. SEU的OPAE处理 11.2. SEU的DPDK处理
A. 故障排除 x
A.1. 如果OPAE安装验证失败，如何手动安装OPAE？
B. 通过BMC的Production版本和 Intel® Arria® 10映像对 Intel® FPGA PAC N3000进行升级 x
B.1. 从1.1 Beta升级到产品(Production)版本 B.2. 从1.1 Alpha-2或者更早版本升级到产品(Production)版本
B.1. 从1.1 Beta升级到产品(Production)版本 x
B.1.1. 编程的根条目哈希(Root Entry Hash Programmed) B.1.2. 未编程的根条目哈希(Root Entry Hash Programmed)
D. fpgabist样例输出 x
D.1. 2x2x25G配置 D.2. 8x10G配置
1. 关于本文档
2. 系统要求
3. 硬件安装
4. 安装OPAE软件
5. OPAE工具
6. 样例测试：本地环回(Native Loopback)
7. 安装Intel XL710驱动程序
8. 配置以太网接口
9. 使用Data Plane Development Kit (DPDK)测试网络环回
10. 正常关机
11. 单粒子翻转(Single Event Upset (SEU))
12. Intel Acceleration Stack用户指南： Intel® FPGA PAC N3000的文档修订历史
A. 故障排除
B. 通过BMC的Production版本和 Intel® Arria® 10映像对 Intel® FPGA PAC N3000进行升级
C. 配置4.19 Kernel
D. fpgabist样例输出

B.2. 从1.1 Alpha-2或者更早版本升级到产品(Production)版本

  1. 加载临时的 Intel® MAX® 10映像来允许更新：
    $ sudo super-rsu /usr/share/opae/n3000/one-time-update/\
<25G or 10G>/super-rsu.json --with-rsu
    [2019-11-04 11:11:29,455] [DEBUG   ] [MAINTHREAD  ] - FOUND FPGA OBJECTS: ['/SYS/CLASS/FPGA/INTEL-FPGA-DEV.0']
[2019-11-04 11:11:29,458] [DEBUG   ] [MAINTHREAD  ] - FOUND DEVICE AT 0000:08:00.0 -TREE IS
 [PCI_ADDRESS(0000:00:03.0), PCI_ID(0X8086, 0X2F08)]
    [PCI_ADDRESS(0000:03:00.0), PCI_ID(0X10B5, 0X8747)]
        [PCI_ADDRESS(0000:04:08.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:05:00.0), PCI_ID(0X8086, 0X0D58)]
            [PCI_ADDRESS(0000:05:00.1), PCI_ID(0X8086, 0X0D58)]
        [PCI_ADDRESS(0000:04:09.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:08:00.0), PCI_ID(0X8086, 0X0B30)]
        [PCI_ADDRESS(0000:04:10.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:0A:00.0), PCI_ID(0X8086, 0X0D58)]
            [PCI_ADDRESS(0000:0A:00.1), PCI_ID(0X8086, 0X0D58)]
        [PCI_ADDRESS(0000:04:11.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:0D:00.0), PCI_ID(0X8086, 0X0B32)]

[2019-11-04 11:11:29,462] [WARNING ] [MAINTHREAD  ] - UPDATE STARTING. PLEASE DO NOT INTERRUPT.
[2019-11-04 11:11:29,462] [DEBUG   ] [MAINTHREAD  ] - BMC_IMG - CURRENT_REV: "D", FLASH_REV: "D"
[2019-11-04 11:11:29,463] [DEBUG   ] [MAINTHREAD  ] - BMC_IMG IS BEING FORCE FLASHED
[2019-11-04 11:11:29,464] [DEBUG   ] [MAINTHREAD  ] - BMC_IMG VERSIONS NOT EQUAL (SYSTEM:1.0.13 != MANIFEST:111.2.13)
[2019-11-04 11:11:29,464] [DEBUG   ] [MAINTHREAD  ] - [08:00.0] UPDATE TIMEOUT SET TO: 1200.0
[2019-11-04 11:11:29,464] [DEBUG   ] [08:00.0     ] - UPDATE OF BOARD AT [PCI_ADDRESS(0000:08:00.0), PCI_ID(0X8086, 0X0B30)] STARTED
[2019-11-04 11:11:29,464] [DEBUG   ] [MAINTHREAD  ] - MAX TIMEOUT SET TO: 0:20:00
[2019-11-04 11:11:29,464] [DEBUG   ] [08:00.0     ] - STARTING TASK: FPGAFLASH BMC_IMG /USR/SHARE/OPAE/N3000/ONE-TIME-UPDATE/25G/
               Intel®
               MAX® 10_SYSTEM_REVD_DUAL_V111.2.13_TEMPORARY_DEFAULT_FPGA_DIE_CFM0_AUTO.RPD 0000:08:00.0
USING /DEV/MTD0
2019-11-04 11:11:30.651141 REVERSING BITS
2019-11-04 11:11:31.227369 ERASING 0X000A8000 BYTES STARTING AT 0X000B8000
2019-11-04 11:11:31.233072 WRITING 0X000A8000 BYTES TO 0X000B8000
2019-11-04 11:12:20.285000 ACTUAL BYTES WRITTEN 0X11B000 - 0XB8000 = 0X63000
2019-11-04 11:12:20.285701 READING 0X00063000 BYTES FROM 0X000B8000
2019-11-04 11:12:21.473206 VERIFYING FLASH
2019-11-04 11:12:21.473641 FLASH SUCCESSFULLY VERIFIED
[2019-11-04 11:12:21,553] [DEBUG   ] [08:00.0     ] - TASK COMPLETED IN 0:00:52.087794
[2019-11-04 11:12:22,579] [INFO    ] [MAINTHREAD  ] - [[PCI_ADDRESS(0000:08:00.0), PCI_ID(0X8086, 0X0B30)]] PERFORMING RSU OPERATION
[2019-11-04 11:12:22,634] [INFO    ] [MAINTHREAD  ] - [[PCI_ADDRESS(0000:00:03.0), PCI_ID(0X8086, 0X2F08)]] REMOVING DEVICE FROM PCIE BUS
[2019-11-04 11:12:22,634] [DEBUG   ] [MAINTHREAD  ] - REMOVING DEVICE AT 0000:00:03.0
[2019-11-04 11:12:22,634] [INFO    ] [MAINTHREAD  ] - WAITING 10 SECONDS FOR BOOT
[2019-11-04 11:12:32,644] [INFO    ] [MAINTHREAD  ] - RESCANNING PCIE BUS: /SYS/DEVICES/PCI0000:00/PCI_BUS/0000:00
[2019-11-04 11:12:32,763] [INFO    ] [MAINTHREAD  ] - REDISCOVERING BOARDS TO VERIFY AFTER RSU
[2019-11-04 11:12:32,764] [DEBUG   ] [MAINTHREAD  ] - FOUND FPGA OBJECTS: ['/SYS/CLASS/FPGA/INTEL-FPGA-DEV.0']
[2019-11-04 11:12:32,766] [DEBUG   ] [MAINTHREAD  ] - FOUND DEVICE AT 0000:06:00.0 -TREE IS
 [PCI_ADDRESS(0000:00:03.0), PCI_ID(0X8086, 0X2F08)]
    [PCI_ADDRESS(0000:03:00.0), PCI_ID(0X10B5, 0X8747)]
        [PCI_ADDRESS(0000:04:08.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:05:00.0), PCI_ID(0X8086, 0X0D58)]
            [PCI_ADDRESS(0000:05:00.1), PCI_ID(0X8086, 0X0D58)]
        [PCI_ADDRESS(0000:04:09.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:06:00.0), PCI_ID(0X8086, 0X0B30)]
        [PCI_ADDRESS(0000:04:10.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:07:00.0), PCI_ID(0X8086, 0X0D58)]
            [PCI_ADDRESS(0000:07:00.1), PCI_ID(0X8086, 0X0D58)]
        [PCI_ADDRESS(0000:04:11.0), PCI_ID(0X10B5, 0X8747)]
            [PCI_ADDRESS(0000:08:00.0), PCI_ID(0X8086, 0X0B32)]

[2019-11-04 11:12:32,767] [DEBUG   ] [MAINTHREAD  ] - BMC_IMG - CURRENT_REV: "D", FLASH_REV: "D"
[2019-11-04 11:12:32,767] [DEBUG   ] [MAINTHREAD  ] - SELF-TEST DISABLED IN CONFIGURATION
[2019-11-04 11:12:32,767] [INFO    ] [MAINTHREAD  ] - SUPER_RSU.PYC UPDATE COMPLETED IN: 0:01:03.305579
[2019-11-04 11:12:32,768] [INFO    ] [MAINTHREAD  ] - SUPER-RSU EXITING WITH CODE '0'

    $ sudo fpgainfo fme
    Intel® MAX® 10构建版本将是111.2.13。 
    $ ls -l /sys/class/fpga/intel-fpga-dev.*/intel-fpga-fme.*/\
spi-altera.*.auto/spi_master/spi*/spi*/intel-generic-qspi.*.auto
    此sysfs entry必须存在。
  2. 运行One-Time Secure Update (OTSU)。此过程大概需要40分钟。
    $ sudo fpgaotsu /usr/share/opae/n3000/one-time-update/<25G or 10G>/\
otsu-*.json --rsu
    [2019-11-04 11:17:30,445] [INFO    ] [MAINTHREAD] INTEL FPGA PAC N3000 0000:06:00.0 IS NOT SECURE.
[2019-11-04 11:17:30,446] [WARNING ] [MAINTHREAD] UPDATE STARTING. PLEASE DO NOT INTERRUPT.
[2019-11-04 11:17:30,446] [INFO    ] [0000:06:00.0] UPDATING INTEL FPGA PAC N3000 : 0000:06:00.0
[2019-11-04 11:17:30,456] [INFO    ] [0000:06:00.0] READING FPGA@0X10000 FOR 256 BYTES FOR VERIFICATION
(100%) [####################] [256/256 BYTES][TIME:0:00:00.012339]              
[2019-11-04 11:17:30,469] [INFO    ] [0000:06:00.0] READ/MODIFY/WRITING FPGA@0X10000 FOR 256 BYTES (VC_OPTION_BITS_REVERSED)
[2019-11-04 11:17:30,584] [INFO    ] [0000:06:00.0] READING FPGA@0X10000 FOR 256 BYTES FOR VERIFICATION
(100%) [####################] [256/256 BYTES][TIME:0:00:00.012686]              
[2019-11-04 11:17:30,601] [INFO    ] [0000:06:00.0] VERIFIED FPGA@0X10000 FOR 256 BYTES (VC_OPTION_BITS_REVERSED)
[2019-11-04 11:17:30,602] [INFO    ] [0000:06:00.0] ERASING FLASH@0X0 FOR 134217728 BYTES
[2019-11-04 11:17:42,122] [INFO    ] [0000:06:00.0] WRITING FLASH@0X3800000 FOR 179748 BYTES (VISTA_ROT_FACTORY_V254.255.16.BIN)
(100%) [####################] [179748/179748 BYTES][TIME:0:00:02.767896]        
[2019-11-04 11:17:44,890] [INFO    ] [0000:06:00.0] READING FLASH@0X3800000 FOR 179748 BYTES FOR VERIFICATION
(100%) [####################] [179748/179748 BYTES][TIME:0:00:00.550265]        
[2019-11-04 11:17:45,499] [INFO    ] [0000:06:00.0] VERIFIED FLASH@0X3800000 FOR 179748 BYTES (VISTA_ROT_FACTORY_V254.255.16.BIN)
[2019-11-04 11:17:45,499] [INFO    ] [0000:06:00.0] WRITING FLASH@0X3A00FF0 FOR 16 BYTES (VISTA_ROT_FACTORY_V254.255.16_HEADER.BIN)
(100%) [####################] [16/16 BYTES][TIME:0:00:00.000288]                
[2019-11-04 11:17:45,512] [INFO    ] [0000:06:00.0] READING FLASH@0X3A00FF0 FOR 16 BYTES FOR VERIFICATION
(100%) [####################] [16/16 BYTES][TIME:0:00:00.000042]                
[2019-11-04 11:17:45,525] [INFO    ] [0000:06:00.0] VERIFIED FLASH@0X3A00FF0 FOR 16 BYTES (VISTA_ROT_FACTORY_V254.255.16_HEADER.BIN)
[2019-11-04 11:17:45,529] [INFO    ] [0000:06:00.0] ERASING FPGA@0X7800000 FOR 8388608 BYTES
[2019-11-04 11:17:46,249] [INFO    ] [0000:06:00.0] WRITING FPGA@0X7FFC004 FOR 32 BYTES (VISTA_DEV_BMC_ROOT_HASH.RAW32)
(100%) [####################] [32/32 BYTES][TIME:0:00:00.000280]                
[2019-11-04 11:17:46,250] [INFO    ] [0000:06:00.0] READING FPGA@0X7FFC004 FOR 32 BYTES FOR VERIFICATION
(100%) [####################] [32/32 BYTES][TIME:0:00:00.000043]                
[2019-11-04 11:17:46,263] [INFO    ] [0000:06:00.0] VERIFIED FPGA@0X7FFC004 FOR 32 BYTES (VISTA_DEV_BMC_ROOT_HASH.RAW32)
[2019-11-04 11:17:46,263] [INFO    ] [0000:06:00.0] WRITING FPGA@0X7FFC000 FOR 4 BYTES (BMC_KEY_PROGRAMMED)
(100%) [####################] [4/4 BYTES][TIME:0:00:00.010881]                  
[2019-11-04 11:17:46,274] [INFO    ] [0000:06:00.0] READING FPGA@0X7FFC000 FOR 4 BYTES FOR VERIFICATION
(100%) [####################] [4/4 BYTES][TIME:0:00:00.011830]                  
[2019-11-04 11:17:46,287] [INFO    ] [0000:06:00.0] VERIFIED FPGA@0X7FFC000 FOR 4 BYTES (BMC_KEY_PROGRAMMED)
[2019-11-04 11:17:46,287] [INFO    ] [0000:06:00.0] ERASING FPGA@0X3820000 FOR 8257536 BYTES
[2019-11-04 11:17:47,118] [INFO    ] [0000:06:00.0] WRITING FPGA@0X3820000 FOR 8192 BYTES (INTEL-PAC-N3000.DTB)
(100%) [####################] [8192/8192 BYTES][TIME:0:00:00.134668]            
[2019-11-04 11:17:47,253] [INFO    ] [0000:06:00.0] READING FPGA@0X3820000 FOR 8192 BYTES FOR VERIFICATION
(100%) [####################] [8192/8192 BYTES][TIME:0:00:00.025550]            
[2019-11-04 11:17:47,279] [INFO    ] [0000:06:00.0] VERIFIED FPGA@0X3820000 FOR 8192 BYTES (INTEL-PAC-N3000.DTB)
[2019-11-04 11:17:47,279] [INFO    ] [0000:06:00.0] ERASING FPGA@0X20000 FOR 58720256 BYTES
[2019-11-04 11:19:07,148] [INFO    ] [0000:06:00.0] WRITING FPGA@0X20000 FOR 44589056 BYTES (VISTA_ROT_FACTORY_2X2X25G_REVERSE.BIN)
(100%) [####################] [44589056/44589056 BYTES][TIME:0:11:55.337529]    
[2019-11-04 11:31:02,512] [INFO    ] [0000:06:00.0] READING FPGA@0X20000 FOR 44589056 BYTES FOR VERIFICATION
(100%) [####################] [44589056/44589056 BYTES][TIME:0:02:13.014834]    
[2019-11-04 11:33:15,559] [INFO    ] [0000:06:00.0] VERIFIED FPGA@0X20000 FOR 44589056 BYTES (VISTA_ROT_FACTORY_2X2X25G_REVERSE.BIN)
[2019-11-04 11:33:15,566] [INFO    ] [0000:06:00.0] ERASING BMCIMG@0X0 FOR 32768 BYTES
[2019-11-04 11:33:15,569] [INFO    ] [0000:06:00.0] WRITING BMCIMG@0X0 FOR 32768 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_UFM0_MDIOFILTER_REVERSED.RPD)
(100%) [####################] [32768/32768 BYTES][TIME:0:00:04.057484]          
[2019-11-04 11:33:19,627] [INFO    ] [0000:06:00.0] READING BMCIMG@0X0 FOR 32768 BYTES FOR VERIFICATION
(100%) [####################] [32768/32768 BYTES][TIME:0:00:00.099048]          
[2019-11-04 11:33:19,726] [INFO    ] [0000:06:00.0] VERIFIED BMCIMG@0X0 FOR 32768 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_UFM0_MDIOFILTER_REVERSED.RPD)
[2019-11-04 11:33:19,727] [INFO    ] [0000:06:00.0] ERASING BMCIMG@0X8000 FOR 32768 BYTES
[2019-11-04 11:33:19,730] [INFO    ] [0000:06:00.0] WRITING BMCIMG@0X8000 FOR 32768 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_UFM1_BOOTLOADER_REVERSED.RPD)
(100%) [####################] [32768/32768 BYTES][TIME:0:00:04.024239]          
[2019-11-04 11:33:23,754] [INFO    ] [0000:06:00.0] READING BMCIMG@0X8000 FOR 32768 BYTES FOR VERIFICATION
(100%) [####################] [32768/32768 BYTES][TIME:0:00:00.102573]          
[2019-11-04 11:33:23,857] [INFO    ] [0000:06:00.0] VERIFIED BMCIMG@0X8000 FOR 32768 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_UFM1_BOOTLOADER_REVERSED.RPD)
[2019-11-04 11:33:23,857] [INFO    ] [0000:06:00.0] ERASING BMCIMG@0X70000 FOR 294912 BYTES
[2019-11-04 11:33:23,861] [INFO    ] [0000:06:00.0] ERASING BMCIMG@0X10000 FOR 393216 BYTES
[2019-11-04 11:33:23,866] [INFO    ] [0000:06:00.0] WRITING BMCIMG@0X10000 FOR 688128 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_CFM1_FACTORY_REVERSED.RPD)
(100%) [####################] [688128/688128 BYTES][TIME:0:01:23.544640]        
[2019-11-04 11:34:47,411] [INFO    ] [0000:06:00.0] READING BMCIMG@0X10000 FOR 688128 BYTES FOR VERIFICATION
(100%) [####################] [688128/688128 BYTES][TIME:0:00:02.038583]        
[2019-11-04 11:34:49,451] [INFO    ] [0000:06:00.0] VERIFIED BMCIMG@0X10000 FOR 688128 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_CFM1_FACTORY_REVERSED.RPD)
[2019-11-04 11:34:49,451] [INFO    ] [0000:06:00.0] ERASING BMCIMG@0XB8000 FOR 688128 BYTES
[2019-11-04 11:34:49,457] [INFO    ] [0000:06:00.0] WRITING BMCIMG@0XB8000 FOR 688128 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_CFM0_USER_REVERSED.RPD)
(100%) [####################] [688128/688128 BYTES][TIME:0:01:23.489277]        
[2019-11-04 11:36:12,947] [INFO    ] [0000:06:00.0] READING BMCIMG@0XB8000 FOR 688128 BYTES FOR VERIFICATION
(100%) [####################] [688128/688128 BYTES][TIME:0:00:02.065609]        
[2019-11-04 11:36:15,013] [INFO    ] [0000:06:00.0] VERIFIED BMCIMG@0XB8000 FOR 688128 BYTES (
               Intel®
               MAX® 10_SYSTEM_REVD_ROT_DUAL_V2.0.6_CFM0_USER_REVERSED.RPD)
[2019-11-04 11:36:20,045] [INFO    ] [0000:06:00.0] ERASING BMCFW@0X0 FOR 8388608 BYTES
[2019-11-04 11:36:46,602] [INFO    ] [0000:06:00.0] WRITING BMCFW@0X0 FOR 179748 BYTES (VISTA_ROT_UPDATE_V2.0.16.BIN)
(100%) [####################] [179748/179748 BYTES][TIME:0:00:02.692600]        
[2019-11-04 11:36:49,295] [INFO    ] [0000:06:00.0] READING BMCFW@0X0 FOR 179748 BYTES FOR VERIFICATION
(100%) [####################] [179748/179748 BYTES][TIME:0:00:00.535994]        
[2019-11-04 11:36:49,888] [INFO    ] [0000:06:00.0] VERIFIED BMCFW@0X0 FOR 179748 BYTES (VISTA_ROT_UPDATE_V2.0.16.BIN)
[2019-11-04 11:36:49,888] [INFO    ] [0000:06:00.0] WRITING BMCFW@0X7F0000 FOR 16 BYTES (VISTA_ROT_UPDATE_V2.0.16_HEADER.BIN)
(100%) [####################] [16/16 BYTES][TIME:0:00:00.000291]                
[2019-11-04 11:36:49,889] [INFO    ] [0000:06:00.0] READING BMCFW@0X7F0000 FOR 16 BYTES FOR VERIFICATION
(100%) [####################] [16/16 BYTES][TIME:0:00:00.011831]                
[2019-11-04 11:36:49,902] [INFO    ] [0000:06:00.0] VERIFIED BMCFW@0X7F0000 FOR 16 BYTES (VISTA_ROT_UPDATE_V2.0.16_HEADER.BIN)
[2019-11-04 11:36:49,906] [INFO    ] [0000:06:00.0] ERASING FPGA@0X4000000 FOR 58720256 BYTES
[2019-11-04 11:38:09,042] [INFO    ] [0000:06:00.0] WRITING FPGA@0X4000000 FOR 44589056 BYTES (VISTA_ROT_FACTORY_4X25G_REVERSE.BIN)
(100%) [####################] [44589056/44589056 BYTES][TIME:0:11:54.859506]    
[2019-11-04 11:50:03,926] [INFO    ] [0000:06:00.0] READING FPGA@0X4000000 FOR 44589056 BYTES FOR VERIFICATION
(100%) [####################] [44589056/44589056 BYTES][TIME:0:02:12.432333]    
[2019-11-04 11:52:16,390] [INFO    ] [0000:06:00.0] VERIFIED FPGA@0X4000000 FOR 44589056 BYTES (VISTA_ROT_FACTORY_4X25G_REVERSE.BIN)
[2019-11-04 11:52:16,463] [INFO    ] [MAINTHREAD] [[PCI_ADDRESS(0000:06:00.0), PCI_ID(0X8086, 0X0B30)]] PERFORMING RSU OPERATION
[2019-11-04 11:52:16,518] [INFO    ] [MAINTHREAD] [[PCI_ADDRESS(0000:00:03.0), PCI_ID(0X8086, 0X2F08)]] REMOVING DEVICE FROM PCIE BUS
[2019-11-04 11:52:16,519] [INFO    ] [MAINTHREAD] WAITING 10 SECONDS FOR BOOT
[2019-11-04 11:52:26,529] [INFO    ] [MAINTHREAD] RESCANNING PCIE BUS: /SYS/DEVICES/PCI0000:00/PCI_BUS/0000:00
[2019-11-04 11:52:30,312] [INFO    ] [MAINTHREAD] TOTAL TIME: 0:34:59.865373
[2019-11-04 11:52:30,312] [INFO    ] [MAINTHREAD] ONE-TIME SECURE UPDATE OK
    如果OTSU失败，那么运行fpgainfo fme找出 Intel® MAX® 10构建版本并按照说明采取相应操作：
    Intel® MAX® 10构建版本 操作
    D.111.2.13 重复OTSU
    D.2.0.6 运行命令：
    sudo super-rsu /usr/share/opae/n3000/super-rsu/<2x2x25G or 8x10G or 4x25G>/super-rsu-*.json --with-rsu
  3. 验证成功的OTSU：
    sudo fpgaotsu /usr/share/opae/n3000/one-time-update/<25G or 10G>/\
otsu-*.json --verify
    [2019-11-04 12:10:00,844] [INFO    ] [MAINTHREAD] INTEL FPGA PAC N3000 0000:06:00.0 IS ALREADY SECURE.
[2019-11-04 12:10:00,845] [WARNING ] [MAINTHREAD] UPDATE STARTING. PLEASE DO NOT INTERRUPT.
[2019-11-04 12:10:00,845] [INFO    ] [MAINTHREAD] TOTAL TIME: 0:00:00.000012
[2019-11-04 12:10:00,845] [INFO    ] [MAINTHREAD] ONE-TIME SECURE UPDATE OK
    此时， Intel® FPGA PAC N3000将有以下 Intel® Arria® 10映像， Intel® MAX® 10 NIOS FW和 Intel® MAX® 10 Build版本。
    配置 用户分区映像 比特流ID PR接口ID Intel® MAX® 10 NIOS FW Intel® MAX® 10 BUILD
    2x2x25G 4x25G 0x2300110010309 f3c99413-5081-4aad-bced-07eb84a6d0bb D.2.0.19 D.2.0.6
    4x25G
    8x10G 8x10G 0x2300010010309 901dd697-ca79-4b05-b843-8138cefa2846 D.2.0.19 D.2.0.6
    重要： 2x2x25G或者4x25G Configuration Installer使用4x25G Intel提供的出厂测试映像加载FPGA闪存用户分区，使用2x2x25G Intel提供的出厂测试映像加载出厂分区。8x10 Configuration Installer使用8x10G Intel提供的出厂测试映像加载用户以及出厂FPGA闪存分区。
  4. 安装PV 1.1 Patch。
二级标题