Support

Rebuilding Degraded RAID Volume After Failed Drive Is Replaced


Last Reviewed: 24-Feb-2017
Article ID: 000005775

Follow these steps to rebuild a RAID volume after replacing a failed hard drive from a redundant RAID volume (RAID 1,5,10):

  1. Turn on the system.
  2. Click Start.
  3. Click All Programs.
  4. Click Intel.
  5. Click Intel® Rapid Storage Technology.
  6. Click Rebuild to another disk.
  7. Select the replacement hard drive and click Rebuild.

Additional instructions for performing a rebuild from the Option ROM are available in the User Guides.