RAID Controller Firmware v5.x or Less to v6.x Update Instructions for Intel® Server RAID Controller SRCU31L

Last Reviewed: 29-Jun-2017
Article ID: 000007834

Intel® RAID Controllers contain a flash part that stores the firmware portion of code required for the operation of the controller. The firmware may be updated to correct an errata or to add features to the operation of the product. In addition to normal flash recovery, this procedure directly address updating RAID controllers from firmware versions 5.x or less to version 6.x or higher. The flash procedure requires moving a jumper on the RAID controller to the flash update/recovery position. The update will not proceed if this jumper is not moved to the flash update/recovery position prior to performing the update. Following the update, the jumper should be moved back to its original "normal" position.

Please read the instructions completely before updating the firmware to v5.x or less to v6.x.

Flash Update/Recovery PDF
Size: 15,968 bytes
Date: January 2002

Note: PDF files require Adobe Acrobat Reader*

This article applies to: