Article ID: 000091778 Content Type: Error Messages Last Reviewed: 07/29/2022

Why do I see the data corruption with Intel® Arria® 10 FPGA DDR4 IP when the calibration passes consistently?

Environment

    Intel® Quartus® Prime Design Software
    External Memory Interfaces Intel® Arria® 10 FPGA IP
BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

You might observe a failure in traffic (TG) while calibration can pass with Intel® Arria® 10 FPGA DDR4 intellectual property for memory parts that require tRFC (Refresh Cycle Time) to be set above 350ns, and are operating above 800 MHz. This is most likely to impact 16Gb DDR4 base die, regardless of memory format (E.g., Discrete Components, UDIMM, SODIMM, RDIMM and LRDIMM).

Resolution

Please contact Intel® Premier Support (IPS) or Intel® Forum support if your memory part requires tRFC to be set above 350ns.

Related Products

This article applies to 1 products

Intel® Arria®

1