Article ID: 000089150 Content Type: Troubleshooting Last Reviewed: 01/27/2023

Why doesn’t the F-Tile Transceiver Toolkit TX and RX reset work in the Intel® Quartus® Prime Pro Edition Software version 21.3?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to problems in the F-Tile Transceiver Toolkit in the Intel® Quartus® Prime Pro Edition Software version 21.3, the TX and RX reset in FGT does not work under the following conditions:

    1.  The RX channel is receiving data from the RX buffer; and 
    2.  The data from the TX channel is loopback to the RX channel via an internal loopback
       

     

    Resolution

    A patch is available to fix this problem for the Intel® Quartus® Prime Pro Edition software version 21.3. Download and install Patch 0.16 from the appropriate link below.

    This problem is fixed beginning with the Intel® Quartus® Prime Pro Edition Software version 22.1.
     

    Related Products

    This article applies to 2 products

    Intel® Agilex™ 7 FPGAs and SoC FPGAs F-Series
    Intel® Agilex™ 7 FPGAs and SoC FPGAs I-Series

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.