Article ID: 000088405 Content Type: Error Messages Last Reviewed: 02/15/2022

Why does the Intel® Stratix® 10 SmartVID device fail to configure in PMBus Master Mode when using Intel® Quartus® Prime Pro Edition Software firmware version 21.3?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem when using  Intel® Quartus® Prime Pro Edition Software versions 21.1, 21.2, and 21.3 and Intel® Stratix® 10 SmartVID devices with a VID fuse value of 900mV, there is a missing VOUT_COMMAND in PMBus Master Mode. This causes the external voltage regulator to not be configured to the expected voltage level resulting in configuration failure.  

     

    Resolution

    To work around this problem, use the patch for Intel® Quartus® Prime Pro Edition Software version 21.3 below.

    For earlier versions of Intel® Quartus® Prime Pro Edition Software, contact Intel.
    This problem is fixed starting from  Intel® Quartus® Prime Pro Edition Software version 21.4

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.