Article ID: 000086865 Content Type: Error Messages Last Reviewed: 01/28/2019

Critical Warning (16562): Review the PowerPlay Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures.

Environment

  • Intel® Quartus® Prime Standard Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    You may see this critical warning in the Intel® Quartus® Prime Standard Edition software version 18.1 or earlier if you compile an Intel® MAX® 10 single-supply design.

    Resolution

    You can ignore it if your device does not exceed the maximum power consumption of VCC_ONE.

    Intel® MAX® 10 single-supply devices have maximum power consumption of VCC_ONE. Running a design that goes beyond the maximum power consumption of VCC_ONE of the Intel MAX 10 single-supply device may cause functional issue on the device. The critical message is not caused by a problem with your design, just reminds customers to make sure not to exceed the VCC_ONE power limit for the device.

    Related Products

    This article applies to 1 products

    Intel® MAX® 10 FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.