Article ID: 000086563 Content Type: Troubleshooting Last Reviewed: 05/04/2015

The Quartus II software verion 14.1 does not include DDR3 I/O placement rules for MAX 10 devices

Environment

  • Quartus® II Subscription Edition
  • I O
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    The Quartus II software release version 14.1 does not include some DDR3 I/O placement rules for external memory interfaces (EMIFs) and voltage references (VREFs) on MAX 10 devices. Without restrictions for placing general-purpose I/Os (GPIOs) near EMIF or VREF pins, the 10M08 and 10M50 devices can function incorrectly.

    Resolution

    This issue is fixed in the Quartus II software version 15.0. There is no workaround for previous software releases.

    Related Products

    This article applies to 1 products

    Intel® MAX® 10 FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.