Article ID: 000086151 Content Type: Troubleshooting Last Reviewed: 09/25/2018

Why is PARALLEL_ADD Intel® FPGA IP is only supported for Intel Arria® 10 ?

Environment

  • Intel® Quartus® Prime Pro Edition
  • All

    BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Pro Edition software version 18.0 Update 1 and earlier, you will see that the PARALLEL_ADD Intel FPGA IP is not supported in the Intel® Cyclone® 10 GX device family. In the IP Catalog, you will see that this IP is supported only for the Intel Arria® 10 device family.

    Resolution

    To work around this problem, generate the IP in Quartus Prime project targeting the Intel Arria 10 device and use it in the Intel Quartus Prime project targeting the Intel Cyclone 10 GX  device family.

    This problem is fixed beginning with the Intel Quartus Prime Pro Edition software version 18.1

    Related Products

    This article applies to 1 products

    Intel® Cyclone® 10 GX FPGA

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.