Article ID: 000085330 Content Type: Troubleshooting Last Reviewed: 12/15/2014

PowerPlay Power Analyzer report and .pin incorrectly reports the VCCERAM voltage is 0.95 V

Environment

  • Quartus® II Subscription Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    In the Quartus® II software release version 14.0 Arria® 10 edition, the PowerPlay Power Analyzer report and Pin-Out File (.pin) incorrectly reports the VCCERAM voltage of production devices as 0.95 V.

    Resolution

    There is no workaround. The correct Arria 10 production device VCCERAM voltage is 0.90 V.

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.