Critical Issue
Description
When the RapidIO II IP core Port 0 Control CSR (offset
0x15C) STOP_ON_PRT_FAIL_ENCOUNTER_ENABLE and DROP_PKT_ENABLE fields
are set, the port should discard all output packets until software
resets the OUT_FAIL_ENC field of the Port 0 Error
and Status CSR (offset 0x158). In addition, when the port
discards a packet, it should set the OUT_PKT_DROPD bit
in the Port 0 Error and Status CSR.
However, when the STOP_ON_PRT_FAIL_ENCOUNTER_ENABLE and DROP_PKT_ENABLE fields
are set, the RapidIO II IP core sets the OUT_PKT_DROPD bit
of the Port 0 Error and Status CSR but does not discard
output packets.
Resolution
This issue has no workaround.
This issue will be fixed in a future version of the RapidIO II MegaCore function.