How do I use a library of parameterized modules (LPM) function in Synopsys FPGA Express? (Synopsys FPGA Express)

LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY lpm;
USE lpm.lpm_components.all;

ENTITY mult_supported IS
  PORT(
    a, b : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
    my_out  : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
    );
END mult_supported;

ARCHITECTURE lpm OF mult_supported IS

BEGIN  
 
  u1 : lpm_mult
    GENERIC MAP(
      lpm_widtha => 8,
      lpm_widthb => 8,
      lpm_widthp => 16,
      lpm_widths => 8,
      lpm_representation => unsigned
      )
    PORT MAP(
      dataa => a,
      datab => b,
      result => my_out
      );
END lpm;

This example illustrates both the instantiation of the LPM function and the passing of its parameters.

Check the FPGA Express on-line help to ensure that the LPM function you want to use is currently supported by the software.