Description
This is caused by an I/O address conflict with your programmer card. Change the address of the programmer card using the dip-
switches on the card and change the address in your maxplus2.ini file
as shown below:
switches on the card and change the address in your maxplus2.ini file
as shown below:
PROGRAMMER_ADDRESS = <new I/O address>
A list of settings and Address locations is below:
1 = ON,
0 = OFF.
Base I/O Address (hex) Dipswitch Setting
1 2 3 4
---------------------------------------------------
270 0 0 0 0
260 1 0 0 0
250 0 1 0 0
240 1 1 0 0
230 0 0 1 0
220 1 0 1 0
210 0 1 1 0
200 1 1 1 0
2F0 0 0 0 1
2E0 1 0 0 1
2D0 0 1 0 1
2C0 1 1 0 1
2B0 0 0 1 1
2A0 1 0 1 1
290 0 1 1 1
280 (default) 1 1 1 1