Article ID: 000082793 Content Type: Troubleshooting Last Reviewed: 02/10/2014

Why do the write, sector_erase or bulk_erase operations of ALTASMI_PARALLEL perform incorrectly?

Environment

    Quartus® II Subscription Edition
BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

Due to a problem in Quartus® II software versions 13.0 and 13.0sp1, the ALTASMI_PARALLEL doesn't conduct the correct sequence when the write, sector_erase or bulk_erase operations are executed after read_rdid or read_status operations.

Resolution

If you do not execute the read_rdid or read_status operations immediately before the write, sector_erase or bulk_erase, these will function as expected.

This problem is resolved in the Quartus II software version 13.1.

Related Products

This article applies to 3 products

Intel® FPGA Configuration Device EPCQ
Intel® Programmable Devices
Intel® FPGA Configuration Device EPCS

1

Need more help?

Contact support

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.