Article ID: 000082188 Content Type: Troubleshooting Last Reviewed: 10/18/2011

The error message displayed in the FIFO MegaWizard Plug-In Manager when you select the SCFIFO megafunction and set depth to a lower value than usedw[] does not show the correct depth.

Environment

    Quartus® II Subscription Edition
BUILT IN - ARTICLE INTRO SECOND COMPONENT

Critical Issue

Description

In the FIFO MegaWizard Plug-In Manager, if you select the SCFIFO megafunction and set depth to a lower value than usedw[], the error message displayed does not show the correct depth. Instead, the error message displays (%1) as the depth value.

Resolution

If you do not know the depth value of the FIFO, set depth to 1, and then check the depth value. You can now set the value of depth or usedw[] so that depth is greater than or equal to usedw[].

Related Products

This article applies to 1 products

Intel® Programmable Devices

1

Need more help?

Contact support

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.