Article ID: 000080845 Content Type: Troubleshooting Last Reviewed: 05/05/2021

Why does the host fail to load the raw binary file(rbf) via Intel® Arria® 10 PCIe* Hard IP for the CvP initialization mode operation?

Environment

  • Intel® Arria® 10 FPGAs and SoC FPGAs
  • Intel® Quartus® Prime Pro Edition
  • Intel® Arria® 10 Cyclone® 10 Hard IP for PCI Express
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to the limitation of the Intel® Arria® 10 PCIe* Hard IP, it can only receive the raw binary file(rbf) from the host successfully via BAR0 when the memory transaction mode is preferred for the CvP initialization opereation. If other BARs are enabled other than the BAR0, the host may fail to load raw binary file(rbf) via Intel® Arria® 10 PCIe* Hard IP successfully. 

    Resolution

    To work around this problem, enable BAR0 when using memory transaction mode to load the raw binary file(rbf) for the CvP initialization operation.

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.