Article ID: 000080429 Content Type: Troubleshooting Last Reviewed: 07/08/2019

What Intel® Arria® V FPGA design examples are available for the DisplayPort Intel® FPGA IP?

Environment

  • Intel® Quartus® Prime Standard Edition
  • DisplayPort Intel® FPGA IP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    DisplayPort Intel® FPGA  IP design examples are available for the Intel® Arria® V GX Starter Kit using the Intel® Quartus® Prime Standard Edition software version 14.0. However, there are no specific DisplayPort design example for other Intel® Arria® V variants, e.g., Intel® Arria® V GZ, GT, ST and SX. 

    Resolution

    To work around this design example problem, follow the steps below

    • Arria® V GX: Intel® FPGA DisplayPort design example for Intel® Arria® V GX is available. The design uses Arria® V GX Starter Kit as its baseboard. User needs to perform pin mapping in order to make it work on Arria® V GX FPGA Development Board or with other custom board. 
    • Arria® V GZ: Generate Intel® Stratix® V DisplayPort design example in Intel® Quartus® Prime standard edition and perform pin mapping according to user's Arria® V GZ custom board. 
    • Arria® V GT, ST, SX: Generate Intel® Arria® V GX design example in Intel® Quartus® Prime standard edition and perform pin mapping according to user's Arria® V GT/ST/SX development kit or custom board.

    Related Products

    This article applies to 1 products

    Arria® V FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.