Article ID: 000080360 Content Type: Troubleshooting Last Reviewed: 01/17/2020

Why doesn't the In-System Memory Content Editor work on hardware in Intel® Stratix® 10 devices.

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Pro Edition software, you may see that the In-System Memory Content Editor(ISMCE) does not work correctly on hardware. This problem occurs when the memory block type is set to Auto and is then implemented as an MLAB. This problem only affects Intel® Stratix® 10 devices and newer.

    Resolution

    To work around this problem, always select M20K memory block type.

    This problem is fixed beginning with version 20.1 of the Intel® Quartus® Prime Pro Edition software.

    Related Products

    This article applies to 2 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs
    Intel® Agilex™ 7 FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.