Article ID: 000077392 Content Type: Error Messages Last Reviewed: 10/31/2017

Critical Warning(18234): ATX PLLs *|xcvr_atx_pll_s10_htile_0|ct1_atx_pll_inst and *|xcvr_atx_pll_s10_htile_0|ct1_atx_pll_inst are 0 ATX PLLs apart.

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Compiling demo design with 4 GXT channels with data rate of 25.78125Gbps, and they are in the same bank. Using an ATX PLL as main PLL, and another ATX PLL as buffer. But Quartus® Prime Pro software will report critical warning as the following message.

    Critical Warning(18234): ATX PLLs *|xcvr_atx_pll_s10_htile_0|ct1_atx_pll_inst and *|xcvr_atx_pll_s10_htile_0|ct1_atx_pll_inst are 0 ATX PLLs apart. For ATX PLL VCO frequencies between 11.4 GHz and 14.4 GHz, when two ATX PLLs operate at the same VCO frequency (within 100 MHz), they must be placed 1 ATX PLLs apart.

    Resolution

    This critical warning will be fixed in Quarts Prime Pro software in a future version. 

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.