Article ID: 000076820 Content Type: Troubleshooting Last Reviewed: 10/20/2015

What reference plane should the DDR4 Vref bypass capacitors connect to on my PCB?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description The bypass capacitors should connect to the plane that is referenced by the signals using Vref. For example, if the signal transmission lines are routed adjacent to a ground plane, then the Vref bypass capacitors should connect to ground.

Related Products

This article applies to 3 products

Intel® Arria® 10 GT FPGA
Intel® Arria® 10 GX FPGA
Intel® Arria® 10 SX SoC FPGA