Article ID: 000076136 Content Type: Error Messages Last Reviewed: 06/30/2014

Error (175001): Could not place Transmitter channel

Environment

  • Arria® FPGAs
  • Arria® V FPGAs and SoC FPGAs
  • Arria® V GT FPGA
  • Quartus® II Subscription Edition
  • PLL
  • Clock
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a bug in Quartus® II software versions 13.0 and 13.1, you may see the Fitter error above if you have two or more transceiver channels with data rates higher than 6.5536 Gbps sharing the same CMU PLL in one Arria® V GT transceiver bank.

    Resolution

    This is a known problem with Quartus II software versions 13.0 and 13.1 that will be fixed in a future version.

    You can set both the following parameters in the Native PHY IP MegaWizard™ to work around this problem:

    • Bonding mode = x1
    • Selected clock network = xN

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.