Article ID: 000076085 Content Type: Troubleshooting Last Reviewed: 06/02/2016

Why is data corrupted when performing loopback using the Arria 10 Hard IP for PCI Express in Gen1 and Gen2 modes?

Environment

    Intel® Quartus® Prime Pro Edition
BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description The Arria® 10 Hard IP for PCI Express® performing loopback in Gen1 and Gen2 modes transmits corrupted data because of an incorrect Quartus® Prime bit setting.
Resolution

For Quartus Prime 15.1.2, install the appropriate patch.  Regenerate your PCIe® Hard IP core and recompile the design.

For Arria 10 GX/GT/SX 1150ES3 or production silicon use patch 2.01.
For Arria 10 GX/GT/SX 660ES2 or production silicon use patch 2.05.
For Arria 10 GX/GT/SX 1150ES, 1150ES2, 660ES silicon use patch 2.14.

This issue is fixed in Quartus Prime software 16.0 and later.

Related Products

This article applies to 1 products

Intel® Programmable Devices

1

Need more help?

Contact support

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.