Article ID: 000075360 Content Type: Error Messages Last Reviewed: 02/01/2023

Warning (332174): Ignored filter at <auto generated filename>.sdc(132): *bitec_hdmi_tx*|rdptr_g[0] could not be matched with a register

Environment

  • Intel® Quartus® Prime Standard Edition
  • Intel® Quartus® Prime Pro Edition
  • Interfaces
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the auto-generated High-Definition Multimedia Interface (HDMI) IP Core sdc file, you may see the following warning during compilation when the IP is configured in RX mode:

    Warning (332174): Ignored filter at <auto generated filename>.sdc(132): *bitec_hdmi_tx*|rdptr_g[0] could not be matched with a register

    This problem occurs because both the RX and TX timing constraints are applied to the auto-generated sdc file regardless of the mode of the IP.

     

     

    Resolution

    When operating in RX mode, this warning can be safely ignored.

    This problem is scheduled to be resolved in a future release of the Intel® Quartus® Prime Pro Edition Software.

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 FPGAs and SoC FPGAs