Article ID: 000075348 Content Type: Troubleshooting Last Reviewed: 05/03/2017

Which versions of Matlab are supported by DSP Builder under Quartus Prime 16.1?

Environment

  • Intel® Quartus® Prime Pro Edition
  • DSP Builder for Intel® FPGAs Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a documentation update problem, the DSP Builder for Intel® FPGAs Introduction Handbook was not updated for the Intel Quartus® Prime software version 16.1.  As a result, the Matlab* versions supported by DSP Builder 16.1 could not be found.

    Resolution

    To work around this issue, see the System Requirements section of the version 17.0 handbook.  Note that versions 16.0 through 17.0 support all the same Matlab versions.

    Related Products

    This article applies to 9 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs
    Intel® Arria® 10 FPGAs and SoC FPGAs
    Arria® II FPGAs
    Arria® V FPGAs and SoC FPGAs
    Cyclone® IV FPGAs
    Cyclone® V FPGAs and SoC FPGAs
    Intel® MAX® 10 FPGAs
    Stratix® IV FPGAs
    Stratix® V FPGAs