- 1.8V (only) DDR2 SDRAM DIMMs with gold-plated contacts.
- Unbuffered, single-sided, or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported.
- 8 GB maximum total system memory using DDR2 667 or DDR2 800 DIMMs.
- Minimum total system memory: 512 MB.
- Non-ECC DIMMs.
- Serial Presence Detect.
- DDR2 800 or DDR2 667 MHz SDRAM DIMMs.
- DDR2 667 SIMMs with SPD timings of only 5-5-5 (tCL-tRCD-tRP).
- DDR2 800 SIMMs with SPD timings of only 5-5-5 or 6-6-6 (tCL-tRCD-tRP).
|Note||A minimum of 512 MB of system memory is required to fully enable both the onboard graphics and the manageability engine.|
|Note||To be fully compliant with applicable DDR SDRAM memory specifications, the board should have DIMMs supporting the Serial Presence Detect (SPD) data structure. This structure allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS tries to correctly configure the memory settings. Performance and reliability can be impacted or the DIMMs might not function under the designated frequency.|
|DIMM Type||SDRAM Technology||Smallest usable DIMM (one x16 Single-sided DIMM)||Largest usable DIMM (one x8 Double-sided DIMM)||Maximum capacity with four identical x8 Double-sided DIMMs|
|DDR2 667||512 Mbit||256 MB||1 GB||4 GB|
|DDR2 667||1 Gbit||512 MB||2 GB||8 GB|
|DDR2 800||512 Mbit||256 MB||1 GB||4 GB|
|DDR2 800||1 Gbit||512 MB||2 GB||8 GB|
Third-party tested memory*
Third-party tested memory occurs as requested by the memory vendors. Memory is tested at an independent memory house that is not a part of Intel - Computer Memory Test Labs (CMTL).
Vendor self tested memory
Intel supplies the memory vendors that participate in this program with a common memory test plan to use as a basic checkout of the memory stability. Memory listed completed testing by the memory vendor or by Intel using this test plan. These part numbers might not be readily available throughout the product life cycle.
The table below lists parts that passed testing conducted using the Intel Self Test program for Intel® Desktop Board DG33TL.
|Module Supplier / Module Part Number||Module Size||Module Speed (MHz)||ECC or Non-ECC|
|Crucial CT6464AA667.4FE||512 MB||667||Non-ECC|
|Infineon HYS64T32000HU-3S-B||256 MB||667||Non-ECC|
|Infineon HYS64T64000HU-3S-A||512 MB||667||Non-ECC|
|Micron MT16HTF12864AY-80ED4||1 GB||800||Non-ECC|
|Micron MT16HTF256664AY-667A3||2 GB||667||Non-ECC|
|Micron MT16HTF25664AY-800E1||2 GB||800||Non-ECC|
|Micron MT4HTF6464AY-667E1||512 MB||667||Non-ECC|
|Qimonda HYS64T128020HU-2.5-B||1 GB||800||Non-ECC|
|Qimonda HYS64T256020EU-2.5F-B||2 GB||800||Non-ECC|
|Qimonda HYS64T64020HU-25F-A||512 MB||800||Non-ECC|
|Samsung M378T2953CZ3-CE6||1 GB||667||Non-ECC|
|Samsung M378T2953CZ3-CE7||1 GB||800||Non-ECC|
|Samsung M378T3354CZ3-CE6||256 MB||667||Non-ECC|