- Supports two 1.5V DDR3 or 1.35V DDR3L (low voltage) SO-DIMMs
- 1333 MHz
- Unbuffered, non-ECC
- Single-sided or double-sided
- Minimum recommended memory: 1 GB
- Maximum memory: 16 GB
- Serial presence detect (SPD)
If you plan to install just one SO-DIMM, install it in the lower memory socket.
See the technical product specification for your Intel® NUC for complete system memory details and requirements.
Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel® boards at the memory manufacturers request. See the CMTL Advanced Tested Intel Approved Memory List for this board.
The table below lists parts reported as compatible by owners of the Intel® NUC Kit DCCP847DYE. Intel has not validated these modules.
|Module manufacturer||Module part number||Module size||Module speed (MHz)|
|Troubleshooting memory issues|