Article ID: 000093543 Content Type: Install & Setup Last Reviewed: 07/11/2023

How to Configure the SmartEdge Access Point IP Address in Druid*

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

How to set the Access Point (AP) IP address in the Druid* core network.

Description

These are the steps to set the Access Point (AP) IP address in the Raemis™ GUI.

Resolution
  1. Connect to the Druid* (Raemis™) core from the monitory PC on the SmartEdge network, using the core IP address. From the web browser type https://x.x.x.x:8089 (x.x.x.x is the Druid* Virtual Machine (VM) IP address).
  2. Click Submit on the configuration page.
  3. Click Go to Raemis GUI, then login with your credentials.
  4. Click on the Network tab on the left side. Select the Port/VLANs tab (upper right).
  5. Scroll down to the eth1 connection and click Edit.
    1. Set IP Configuration to static.
    2. Enter the IP address for the AP.
    3. Enter subnet mask.
    4. Click Save.

Related Products

This article applies to 1 products