Is It Possible to Read Data from an Intel® Virtual RAID on CPU (Intel® VROC) RAID 1 Member Drive on a Non-Intel® VROC Platform?
Content Type: Troubleshooting | Article ID: 000090719 | Last Reviewed: 09/24/2024
Unable to determine if it is possible to read data from an SSD that was formerly part of a RAID 1 array when connected to a different board.
Due to the mirroring nature of the RAID 1 volume, there should be no problem reading the data from a member disk that was part of the RAID 1 array while it is connected to a different board. This action however, is not recommended unless it is a dire situation such as RAID failure scenarios where recovering the data is detrimental.