How to Install USB 3.0 Drivers into Windows* 7 and Windows 2008 R2 on the Intel® Server Board S1200SP Family

Documentation

Install & Setup

000022400

01/30/2020

What are the primary installation requirements?

Disclaimer: Any links provided for third party tools or sites are offered for your convenience and should not be viewed as an endorsement by Intel of the content, products, or services offered there. Intel does not offer support for any third party tool mentioned here.

Are there other requirements?

  • You have a valid copy of Windows Server 2008 R2 x64 ISO or DVD.
  • You have at least 10 GB of free disk space.
  • Your system is running Windows 7 with administrative privileges.
  • Your system has .NET Framework 4.0 installed.
  • Your USB flash drive is already inserted.

How do I install the drivers?

  1. Create USB flash drive installer:
    1. Install and run Windows USB/DVD Download Tool.
    2. Click the Browse button and locate your Windows Server 2008 R2 x64 ISO. Click the Next button to continue.
    3. Select USB device as your media type.
    4. Choose your USB flash drive in the drop-down menu and click the Begin copying button.
      Warning: The next process will destroy all your data in your USB flash drive. Back up your important files before proceeding.
    5. Click the Erase USB Device button.
      Erase USB Device
  2. Copy Windows setup files and USB 3.0 drivers:
    1. Create a temporary working directory in your system:
      • C:\WIM
    2. Create subdirectories under your working directory:
      • C:\WIM\MOUNT
      • C:\WIM\USB30
        create sub-directories
    3. Locate and copy the boot.wim and install.wim image files in the \sources directory on your USB flash drive to C:\WIM\ folder.
      Locate and copy
    4. Extract but do not install the Intel® USB 3.0 eXtensible Host Controller Driver for Intel® Server Boards and copy both the x64 folder from \Drivers\Win7 and \Drivers\HCSwitch to the C:\WIM\USB30 directory.
      Extract but do not install
  3. Mount the install.wim image:
    1. Run DISM GUI with Administrator privileges.
    2. Under the Mount Control tab, click the Choose WIM button.
      Choose WIM
    3. Navigate to where you copied install.wim and click Open.
      click Open
    4. Choose the proper index number from the Index drop-down menu.Choose the index number
      Note

      You can identify the Index of your preferred Edition by clicking the Display WIM info button.

      In this example, we will be using Index 1.

    5. Click the Choose Folder button for the Mount Location. Browse to the proper folder and click OK.
      Click Choose Folder
    6. Verify that the Read Only check box is unchecked and click the Mount WIM button.click the Mount WIM
      Note The mounting process may take a few minutes, depending on your system performance and the size of the install.wim file.
  4. Add USB 3.0 drivers to the install.wim image:
    1. Under the Driver Management tab, click the Choose Driver Folder button.
      Choose Driver Folder
    2. Select the location of your USB 3.0 drivers and click OK.
      Select the location
    3. Verify that the Force Unsigned and Recurse check boxes are checked and click the Add Drivers button.
      click Add Drivers
  5. Commit the changes to the install.wim image and unmount:
    1. Under the Mount Control tab, click the Dismount WIM button and select Yes to commit the changes.
      click Dismount WIM
  6. Mount and add USB 3.0 drivers to the boot.wim Image Index 1 (Windows PE) and Index 2 (Windows Setup).
    You also need to add USB 3.0 drivers to the Windows PE and Windows Setup indices in the boot.wim image for them to be part of the OS installation. Similar to the process above, but this time the boot.wim and indices 1 and 2 will be used.
    1. Under the Mount Control tab, click the Choose WIM button. Navigate to where you copied boot.wim and click Open.
      click Choose WIM
    2. Choose index number 1 from the Index drop-down menu and click the Mount WIM button.
      Choose index number
    3. Select the Driver Management tab and click the Add Drivers button.
      click the Add Drivers button
    4. Go back to the Mount Control tab and click the Dismount WIM button.
      click the Dismount WIM button
    5. Repeat steps from 6a up to 6d but this time, change the Index to 2.
  7. Restore the modified WIM Files to the USB Flash Drive Installer:
    1. Copy the newly modified install.wim and boot.wim files back to the \sources directory of the USB Flash Drive Installer, overwriting the original files.
    2. Eject and remove the USB Flash Drive.
  8. Install Windows* Server 2008 R2:
    1. Insert the modified USB Flash Drive into the target computer.
    2. Boot from the USB Flash Drive and install Windows Server 2008 R2 as usual.
      Note USB mouse and keyboard functions should be present throughout the installation process, as well as when the target computer is restarted onto the new Windows* installation.