Get Started with Intel® NUC Kit NUC5i5MYHE

Documentation

Install & Setup

000021821

08/25/2021

Here's a checklist for you to get started using your Intel® NUC Kit NUC5i5MYHE.

  • Follow the User Guide to begin using your Intel NUC.
  • Find compatible memory modules.
  • Find compatible peripherals (for example, drives, monitors, and hubs).
  • Download and install the latest BIOS version:
  • Install an operating system:
  • Install the latest device drivers from Intel® Download Center for: 
    • Chipset
    • Graphics
    • Wireless and/or Gigabit Ethernet (depending on how you connect)
    • Intel® Management Engine
    • USB 3.0—required if you install Windows 7*
    • Bluetooth®—Required if you plan to use Bluetooth devices
    • Audio—required if you use the 3.5mm audio jack
    • Consumer Infrared (CIR)—required if you use an infrared remote control
    • Serial I/O—required if you use the I2C, SPI, UART, or GPIO host controllers
    • NFC (Near Field Communications)—required if you connect an NFC device to the board (not available on all revisions)
  • Read the regulatory documentation.
  • Learn about the Limited Warranty.
  • See What's in the Box.