System Memory for Intel® Desktop Board D915GEV

System memory features
The board has four DIMM sockets and supports the following memory features:

• 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts
• Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported
• 4 GB maximum total system memory
• Minimum total system memory: 128 MB
• Non-ECC DIMMs
• Serial Presence Detect
• DDR2 533 MHz or DDR2 400 MHz SDRAM DIMMs

Supported DIMM configurations

Tested memory

3rd-party tested memory occurs as requested by the memory vendors and is tested at an independent memory house that is not a part of Intel. Memory tested by Computer Memory Test Labs (CMTL).

Vendor self-tested memory
Intel supplies the memory vendors that participate in this program with a common memory test plan to use as a basic checkout of the memory stability. Memory listed here was either tested by the memory vendor or by Intel using this test plan. These part numbers may not be readily available throughout the product life cycle.

The table below lists parts which passed testing conducted using Intel's Self Test program for Intel® Desktop Board D915GEV.

Updated: November 30, 2006