System Memory for the Intel® Desktop Board D915GAV

System memory features
The boards have four DIMM sockets and support the following memory features:

• 2.6V (only) DDR SDRAM DIMMs with gold-plated contacts
• Unbuffered, single-sided or double-sided, DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported
• 4 GB maximum total system memory
• Minimum total system memory: 128 MB
• Non-ECC DIMMs
• Serial Presence Detect
• DDR 400 MHz and DDR 333 MHz SDRAM DIMMs

Supported system bus frequency and memory speed combinations

Supported memory configurations

Tested memory

Third-party tested memory occurs as requested by the memory vendors and is tested at an independent memory house that is not a part of Intel. Memory tested is by Computer Memory Test Labs* (CMTL).

Vendor self tested memory
Intel supplies the memory vendors that participate in this program with a common memory test plan to use as a basic checkout of the memory stability. Memory listed here is tested either by the memory vendor or by Intel using this test plan. These part numbers might not be readily available throughout the product life cycle.

The table below lists parts that passed testing conducted using the Intel Self Test program for Intel® Desktop Board D915GAV.