Click or the topic for details:
Is a driver required for the Intel® Solid-State Drive 910 Series (Intel® SSD 910 Series)?Yes, the Intel® SSD 900 Family driver. This driver is required for the system to recognize an Intel® SSD 910 Series drive. For more information, review the README file Installation Guide for guidance on the correct way of installing the Intel SSD 910 Series drive on any platform. This driver only works with Intel® SSD 910 Series drives, using 64-bit operating systems, and is only available in English.
Why does my drive look like four individual drives?The Intel® Solid-State Drive 910 Series (Intel® SSD 910 Series) products are designed with multiple 200 GB drives/controllers to maintain performance. The 400 GB model has two drives and the 800 GB model has four drives. Each controller is seen as an individual drive by the OS. You can use your OS disk management utilities or a software RAID utility to aggregate the drives as needed. The hardware RAID is not supported for the Intel® SSD 910 Series.
Can you install an operating system on this device?No. You cannot install an operating system, because the Intel® SSD 910 Series is not a bootable device. These drives are intended for high performance data storage.
Why does my device show as an Intel® Solid-State Drive SSD 720 Series (Intel® SSD 720 Series) when it is an Intel® SSD 910 Series?The Intel production driver is incorrectly labeling the Intel® SSD 910 series as an Intel® SSD 720 series. A future driver version will fix this error. There is no impact to functionality and specifications. The Intel® SSD Data Center Tool recognizes the drive correctly.
What tools can be used with the Intel® SSD 910 Series?The Intel® SSD Data Center Tool is the drive management software for the Intel® SSD 910 Series.
Does the Intel® SSD 910 Series support TRIM?No, TRIM is an ATA command, and the Intel® SSD 910 Series is based on SCSI. The equivalent command in SCSI is the unmap command, which Intel® SSD 910 Series does not support. You can find the SCSI commands that are supported in the section 4.1 of the product specification.
Does the Intel® SSD 910 Series support TRIM in a RAID configuration?No, not normally. The requirements for the SSD to support TRIM in RAID is really up to the RAID software. The RAID software is responsible for sending commands to the drive. The latest version of Intel® Rapid Storage Technology (Intel® RST) should support RAID 0.
Does Windows 7* automatically turn off defrag and superfetch/prefetch for the Intel® SSD 910 Series? If not, then does it need to be done manually (and how do you do it)?
Since Intel® SSD 910 series by itself is not bootable, it needs a system with a Windows 7 bootable drive.
If the drive is an SSD, Windows 7 detects it as an SSD and turns off defrag and superfetch/prefetch for the whole system including the Intel® SSD 910 series.
If the drive is HDD (hard disk drive), then you turn off defrag and superfetch/prefetch manually. Once these features are turned off, it is off for all drives including the HDD.
|Software and Driver Downloads|
|Detailed Product Information|
|Solid-State Drives Forum|