System Memory for the Intel® Desktop Board DH55PJ

Contents:

• System memory features
• Supported memory configurations
• Tested memory

System memory features
The board has two DIMM sockets and supports the following memory features:

• Two independent memory channels with interleaved mode support
• Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8 organization
• 8 GB maximum total system memory (with 2 Gb memory technology)
• Minimum total system memory: 1 GB using a 1 Gb x8 module
• Serial presence detect
• DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs

To be fully compliant with applicable DDR SDRAM memory specifications, the board should have DIMMs that support the serial presence detect (SPD) data structure. This structure allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS tries to correctly configure the memory settings. Performance and reliability can be impacted or the DIMMs might not function under the designated frequency.

Supported memory configurations

Tested memory
Third-party tested memory