Physical Installation Instructions for Intel® Solid State Drive 750 Series

Documentation

Install & Setup

000005956

06/25/2022

Note

Intel's NAND SSD business has been acquired by SK hynix and is now Solidigm™.  See Customer Support changes for more details.

See the instructions below for how to install the Intel® Solid State Drive 750 Series hardware. For compatibility with NVM Express* (NVMe*), use with a system based on an Intel® Z97 Chipset, Intel® X99 Chipset, or later chipset.

 

Before you begin

Caution

Caution icon

Disconnect the desktop board's power supply from its AC power source before you connect or disconnect cables, or install or remove any board components.

Without first disconnecting the power supply, you risk personal injury or equipment damage.

Some circuitry on the desktop board can operate even if the front panel power switch is off.

Electrostatic discharge (ESD) can damage desktop board components. Install the board at an ESD-controlled workstation. If an ESD-controlled workstation is unavailable, wear an anti-static wrist strap or touch the surface of the anti-static package before handling the board.

 

Prepare

Your board may have multiple PCIe* slots. The PCIe SSD needs a PCI Express* (PCIe) x4 connector. Best performance is with a PCIe 3.0 connector.

PCIe* slots Z87

In our example:

  • Install the PCIe SSD in connector A, C, or F.
  • We recommend the connector closest to the processor/CPU (F) for best performance.
  • If you detect issues, the connector farthest from the CPU (A) might be more successful.
  • If you are using a third-party (add-in card) video card, place it in the PCIe connector closest to CPU (F).

 

Installation steps for Intel® SSD 750 Series Add-in Card (AIC)

  1. Find the proper PCIe 3.0 connector. Remove the screw and shield from your chassis.
  2. Attach the SSD to the proper size I/O shield for your chassis. The half-height shield is in the box packaging.
  3. Insert the SSD.
  4. Replace the chassis screw in the shield to hold the SSD in place.

See your chassis manual for more detailed instructions.

SSD 750 series


Installation steps for the Intel® SSD 750 Series 2.5-inch drive

  1. Mount the SSD in the chassis using screws to hold the SSD securely.
  2. Connect the cable from the SSD (SFF 8639) to the motherboard connector (SFF 8643).
  3. Connect SATA power to the connector on the cable.

See your chassis manual for more detailed instructions.

SFF 8639 SFF 8643
SSF 8639 power cable SSF 8643 power cable

 

Note

Make sure the electrical connection to the mini-SAS HD connector is PCIe, not SAS or SATA. NVMe SSDs only support PCI Express* signals.

The SFF 8643 connector is also called a mini-SAS HD connector.
The SFF 8639 may also be called a SATA-express* drive connector with more signals.