See the troubleshooting tips below if your computer doesn't recognize an Intel® Solid State Drive (Intel® SSD).
Check your hardware
- Make sure all cables and ports are clean, dirt-free and are not damaged.
- Try different cables and ports if possible.
- Test a known working drive on the current port.
- Make sure the drive is connected directly to the motherboard. Intel® SSDs connected by an adapter/dongle/enclosure may not be detected in the OS and the Intel® Memory and Storage Tool.
- For Add-in-Cards (AIC), try to 'reseat' the drive. Also try moving the card to another slot in the motherboard.
- If the drive is a PCIe* NVMe* device, confirm the compatibility and proper ports with the motherboard/system vendor.
- If there is another system available, check the SSD in that system.
Check your system BIOS
- Make sure the motherboard is running the latest BIOS version, check with the system vendor to download the latest.
- Confirm in the motherboard user guide that all settings are correct for the type of drive that is being used. (For example, there may be specific settings for enabling PCIe* drives vs SATA drives.)
Make sure you have the latest drivers and firmware Installed
- If the SSD is a PCIe NVMe drive (Intel® SSD model names that have a 'p' in them are based on the PCIe interface), make sure the latest Intel NVMe drivers are installed.
- Make sure the SSD is using the latest firmware available.
Note If you purchased your device from an OEM, check the vendor support site for the latest firmware.
If the error occurred during the operating system installation
|Tips and Troubleshooting for Intel® Optane™ Memory|
|Intel® SSD Tools|